Walkway Width Australian Standard

The minimum width of a pedestrian walkway in Australia is 1.5 metres. However, the recommended width is 2.0 metres to allow for two people to comfortably walk side-by-side. Wider paths may be required in areas with high pedestrian traffic or where pedestrians are likely to be walking with luggage or other items.

Are you planning on building a new walkway? If so, you’ll need to make sure that it meets the Australian Standard for walkway width. The minimum width for a standard domestic walkway is 1.2 meters.

However, if you’re expecting high traffic volumes or you want your walkway to be wheelchair accessible, you’ll need to make it at least 1.5 meters wide. Keep in mind that the wider your walkway is, the more expensive it will be to build. But if you skimp on width, you could end up with a cramped and dangerous path that doesn’t meet code.

So it’s important to get the size right from the start. If you’re not sure what size walkway is right for your needs, talk to a professional builder or architect who can help you plan an compliant and safe path.

Beginner Concrete Side Walk Slab DIY

Minimum Walkway Width

As the weather gets colder and winter approaches, it’s important to be aware of the potential for ice on walkways and take precautions to prevent injuries. One way to do this is by ensuring that your walkway is wide enough. The minimum width for a safe walking surface is 3 feet (0.9 meters).

This means that if you have a narrow path, it’s best to clear away any snow or ice so that people can safely pass by without having to worry about slipping. Of course, the width of your walkway will also depend on how many people need to use it at once. If you have a lot of foot traffic, you may need to make sure your walkway is even wider so that people can comfortably move around without bumping into each other.

Whatever the width of your walkway, always make sure it’s clear of any hazards before allowing anyone to use it. Ice can be extremely slippery and dangerous, so never take risks when it comes to safety!

Walkway Standards Australia

There are many different types of walkways in Australia, each with their own specific standards. Here is a brief overview of some of the most common types of walkways and their corresponding standards. Type 1 Walkways: These are paved surfaces that are designed for pedestrian traffic only.

They must be at least 1.2 meters wide and have a minimum slope of 2%. Type 2 Walkways: These are also paved surfaces, but they are designed for both pedestrian and bicycle traffic. They must be at least 2 meters wide and have a maximum slope of 5%.

Type 3 Walkways: These are unpaved surfaces, such as gravel or grass, that are designed for pedestrian traffic only. They must be at least 1 meter wide and have a maximum slope of 10%. Type 4 Walkways: These are unpaved surfaces, such as gravel or grass, that are designed for both pedestrian and bicycle traffic.

They must be at least 2 meters wide and have a maximum slope of 15%.

Minimum Walkway Width in Office Australia

There are a few things to consider when it comes to the minimum walkway width in office buildings in Australia. The first is the occupancy of the space, which will help determine how many people will be using the space at any given time. This will obviously affect the amount of traffic that goes through the area, and therefore the width of the walkway should be able to accommodate that.

Another thing to consider is whether or not there are any obstacles in the way that could impede foot traffic. Things like furniture, file cabinets, and other equipment can all contribute to congestion if they’re not placed properly. Finally, you’ll need to think about code requirements for your specific building.

Each state has different regulations when it comes to fire safety and egress, so make sure you’re familiar with what’s required in your area before finalizing any plans. With all of that said, there is no definitive answer when it comes to minimum walkway widths in office buildings. It really depends on a variety of factors, so it’s important to sit down and assess your specific needs before making any decisions.

Once you have a better understanding of what you need, you’ll be able to choose a width that works best for your space and ensures everyone stays safe while moving around your office building.

Australian Standard As1657

If you’re in the construction industry in Australia, then you’re probably well aware of Australian Standard AS1657. This important standard sets out the requirements for metal platform systems, walkways, stairways and ladders – basically anything that provides access to a working area. AS1657 was first published in 1992, and has been revised several times since then to keep up with changing technology and work practices.

The most recent revision was published in 2013. So what does AS1657 cover? In short, it covers the design, construction and testing of metal access platforms, walkways, stairs and ladders.

It includes requirements for materials, loads, dimensions, finishes and more. If you’re responsible for any type of metal access system in Australia, then you need to make sure it complies with AS1657. Non-compliance can lead to serious accidents and injuries – not to mention hefty fines from WorkSafe Victoria or other regulatory bodies.

Need help making sure your metal access systems are compliant with AS1657? Contact us today – we’re experts in this field and can provide all the advice and assistance you need!

Walkway Width Australian Standard

Credit: www.alibaba.com

-What is the Standard Walkway Width in Australia

There is no definitive answer to this question as walkway widths can vary depending on the location and purpose of the walkway. However, a good rule of thumb is to allow for a minimum width of 1 metre when planning your walkway. This will ensure that there is enough space for two people to comfortably walk side by side, without feeling cramped or crowded.


In Australia, the standard for walkway width is 1.2 meters, or about four feet. This measurement is for both pedestrian and wheelchair access. The reason for the wider standard is to accommodate the difference in size between adults and children, as well as people using mobility devices.