To remove a kitchen drawer, first identify which type of drawer it is. The most common type is the side-mount drawer, where the drawer slides on metal rails attached to the sides of the cabinet opening. If your drawer is this type, open it about halfway and look for a small gap between the back of the drawer and the cabinet wall.
Insert a putty knife or other thin tool into this gap and push firmly until you feel the catch release. Press down on the front of the drawer while continuing to hold in the catch, then pull out the drawer completely.
- Open the cabinet doors below the drawer you wish to remove
- Locate the screws on the side of the drawer and unscrew them
- Carefully pull the drawer out of its opening
- If it is stuck, gently wiggle it until it comes loose
- Set the drawer aside and inspect the contents of the cabinet for any items that may have fallen behind or been hidden by the drawer
How To Remove Soft Close Kitchen Drawers – NEW Kitchens 2019 – 2022
How Do You Remove Kitchen Drawers With Bottom Slides?
If you have a kitchen drawer with bottom slides, you may be wondering how to remove it. The first thing you need to do is remove the screws that hold the drawer in place. Once the screws are removed, you can then gently pull the drawer out.
If the drawer is stubborn, you may need to use a putty knife or other flat tool to help pry it out.
Once the drawer is removed, you can then access the slides. To remove the slides, you will need to unscrew them from the bottom of the drawer.
Once they are unscrewed, you can then pull them out and away from the drawer.
How Do You Remove a Drawer from a Fitted Kitchen?
If you need to remove a drawer from your fitted kitchen, there are a few things you’ll need to do first. First, you’ll need to empty the drawer completely and remove any items that may be blocking it from being removed. Next, locate the screws that are holding the drawer in place.
These will either be at the top or bottom of the drawer, depending on your model. Once you’ve found the screws, use a screwdriver to loosen and remove them. With the screws removed, you should now be able to pull the drawer out completely.
If you have any trouble removing the drawer, consult your kitchen’s manual for further instructions.
How Do You Remove Drawers With Full Extension Slides?
Assuming you’re talking about removing drawers with full extension ball bearing slides, the process is actually quite simple. First, you’ll need to remove any screws or nails that are holding the drawer front in place. Once those are removed, you can simply pull the drawer front off of the slide.
With the drawer front removed, you should be able to see two releasing levers – one on each side of the slide. Simply push down on these levers and the drawer will come free from the slide.
How Do You Remove a Drawer With No Release?
There are a few ways to remove a drawer with no release, but the most common and effective way is to use a putty knife. First, insert the blade of the putty knife into the space between the drawer and the frame. Next, twist the putty knife until it catches on something inside the drawer (usually a screw or peg).
Finally, pull on the handle of the drawer while continuing to twist the putty knife until the drawer pops out.

Credit: www.familyhandyman.com
How to Remove Drawers With Metal Glides And No Levers
If you have ever had to remove a drawer with metal glides and no levers, you know how frustrating it can be. The process can be even more difficult if the drawer is stuck or if the glides are damaged. However, there are a few tips that can make removing drawers with metal glides much easier.
One of the best ways to remove a drawer with metal glides is to use a putty knife. Insert the blade of the putty knife between the glide and the drawer frame. Then, apply pressure to the handle of the knife until the drawer pops out.
You may need to wiggle the drawer back and forth a bit before it comes free.
Another method that can be used to remove a drawer with metal glides is to use a screwdriver. First, find a small hole in the bottom of the glide.
Then, insert the tip of the screwdriver into this hole and push up on it until you feel resistance. At this point, stop pushing and begin twisting the screwdriver clockwise. This should loosen up any debris that may be holding onto your drawer and allow you to pull it out easily.
If neither of these methods work or if your drawers are particularly stubborn, you may need to call in some help from a professional handyman or furniture repair person.
How to Remove Dresser Drawer With Wooden Center Slide
If you need to remove a dresser drawer with a wooden center slide, there are a few things you’ll need to do. First, locate the two screws that hold the slide in place. These are usually located at the top of the drawer, near the front.
Once you’ve found the screws, unscrew them and set them aside. Next, find something to wedge under the drawer so it doesn’t fall down when you remove the slide. A piece of wood or a book will work fine.
Now gently pull on the slide until it comes free from the dresser drawer. Be careful not to damage the finish on your dresser as you do this. And that’s it!
You’ve now successfully removed your dresser drawer with a wooden center slide.
How to Remove Drawer With Single Undermount Slide
Assuming you would like a blog post discussing how to remove a drawer with a single undermount slide:
If you need to remove your drawer for any reason, follow these steps. With most drawers, removing them is relatively easy.
But if yours has a single undermount slide, it may be trickier. Here’s how to do it:
1. First, open the drawer all the way.
If there are any items in the way, remove them so that you have clear access to the back of the drawer and the underside of the cabinet.
2. Next, locate the screws that hold the slide in place. There are usually two of them, one on each side.
Unscrew these screws and set them aside.
3. Now you can gently pull on the drawer until it comes free from the cabinet. Note that there may still be some resistance because of the way the slide is designed – just keep pulling until it pops out completely.
4. Finally, take a look at how the slide was attached and reattach it when you put the drawer back in place (if necessary). Be sure to screw it in securely so that there’s no risk of it coming loose again.
Conclusion
Assuming you would like a summary of the blog post “How to Take Out a Kitchen Drawer”:
1. First, identify which screws are holding the drawer in place – there are usually two at the top and two at the bottom.
2. Use a screwdriver to remove these screws, being careful not to strip them.
3. Once the screws are removed, gently pull the drawer out until it comes free from the cabinet.
4. If the drawer is stuck, try wiggling it back and forth until it comes loose.
5. Finally, inspect the drawer and cabinet for any damage that may have occurred during removal, and make any necessary repairs before reattaching the drawer or putting it back in use.