If your kitchen drawers are starting to feel a little bit cramped, or if they’re sticking when you try to open them, it might be time to remove the drawer slides. This is a relatively easy process that anyone can do with a few simple tools. First, you’ll need to gather a few supplies: a screwdriver, an Allen wrench, and something to catch the falling drawer (a towel or piece of cardboard will work).
- First, identify which screws are holding the drawer in place
- There are usually two screws located at the top of the drawer
- Use a screwdriver to remove these screws and set them aside
- Next, gently pull the drawer out of its opening
- If it is stuck, wiggle it back and forth until it comes loose
- Once the drawer is removed, take a look at the tracks that it slides on
- If there is any built-up dirt or grime, use a cloth to wipe them clean
- To put the drawer back in place, simply reverse these steps
Side Glide Drawer Removal
How Do You Remove Drawers With Bottom Metal Glides And No Levers?
If your drawers are equipped with bottom metal glides and do not have any levers, removing them may seem like a daunting task. However, it is actually quite simple to do. All you need is a screwdriver and a few minutes of time.
Start by unscrewing the screws that are holding the drawer glide in place. You will likely find these screws near the front of the drawer, towards the bottom. Once the screws are removed, you should be able to pull the glide off easily.
Next, locate the small L-shaped bracket that is attached to the side of the drawer box. This bracket helps to support the weight of the drawer and also keeps it from tipping over when open. Use your screwdriver to remove the two screws that hold this bracket in place.
With both brackets removed, you should now be able to lift the drawer out of its opening easily. If there is any resistance, make sure that all four corners of the drawer are disengaged from their respective slots before trying to remove it completely.
How Do You Remove a Drawer Slide Without a Lever?
Assuming you’re talking about a traditional drawer slide (i.e. not ball-bearing or soft-close), there are generally two ways to remove them without a lever. The first is to simply pull the drawer out far enough that you can access the back of the slide, and then use a screwdriver or other tool to pry it off the back of the drawer. This may damage the finish on your drawer, so be careful.
The second method is to remove the screws that hold the slide in place (usually located at the front of the slide). Once these are removed, you should be able to carefully pull the slide off without damaging anything.
How Do You Remove a Full Slide Drawer?
Assuming you’re talking about a dresser drawer:
First, remove everything from the drawer. Next, locate the screws on the underside of the dresser that hold the drawer in place.
Unscrew these and set them aside. Finally, gently pull the drawer out of its frame. If it’s stuck, wiggle it side to side until it comes free.
How Do You Remove Kitchen Drawers?
Assuming you want to remove a drawer from a kitchen cabinet:
1. Open the drawer and empty its contents.
2. Locate the screws or bolts at the back of the drawer that secure it to the cabinet frame.
In some cases, these may be hidden by a decorative panel on the back of the drawer.
3. Use a screwdriver or wrench to loosen and remove these fasteners.
4. Carefully pull the drawer out of the cabinet frame.
If it is stuck, gently tap it with a rubber mallet until it comes loose.

Credit: diy.stackexchange.com
How to Remove Drawers With Metal Glides And No Levers
If you need to remove a drawer with metal glides and no levers, there are a few things you’ll need to do. First, locate the release mechanism on the side of the drawer. This is usually a small knob or lever that when pulled, will allow the drawer to be removed.
If you can’t find the release mechanism, consult your owner’s manual for help.
Once you’ve found the release mechanism, pull it and then carefully pull the drawer out of its opening. Be careful not to damage the finish on either the drawer or the cabinet.
If necessary, use a putty knife or other flat object to help pry the drawer out if it’s sticking.
Withdrawers with metal glides are often used in kitchen cabinets and bathroom vanities. They offer a smooth opening and closing action, but can sometimes be difficult to remove without damaging them.
With a little care and patience, however, you should be able to remove your drawers without any problems!
How to Pull Out Kitchen Drawers
If you’re like most people, your kitchen drawers are probably crammed full of all sorts of things – from utensils to Tupperware to that one weird thing you can’t remember what it’s for. Luckily, there’s an easy way to get everything organized and tidy in no time – with a little help from some drawer dividers!
Here’s what you’ll need:
– A few sets of drawer dividers (you can find these at any home goods store)
– A measuring tape or ruler
– Some scissors
– Optional: labels and a label maker
First, measure the inside of your drawer(s) to see what size dividers will fit best. Once you have your dividers, use the scissors to cut them down to size if necessary.
If you want to get really organized, label each compartment with something like “utensils,” “baking supplies,” or “silverware.” Otherwise, just skip ahead to the next step.
Now it’s time to start filling up those compartments!
Sort through everything in your drawer(s) and put like items together. Utensils with utensils, silverware with silverware, etc. Once everything is sorted, start placing items into the various compartments until they’re all full.
And that’s it! You now have neatly organized kitchen drawers that will make cooking and cleaning much easier.
How to Remove Dresser Drawer With Wooden Center Slide
If you have a dresser drawer with a wooden center slide, there are a few things you need to do in order to remove it. First, you need to find the screws that hold the drawer slide in place. Once you have found these screws, loosen them and then remove the drawer slide from the dresser.
Next, you will need to remove the drawer knobs or handles. To do this, simply unscrew them from the front of the drawer. Finally, you can now pull out the drawer from the dresser.
Conclusion
If your kitchen drawers are sticking or sliding poorly, it may be time to remove them and start fresh. This process is relatively easy and only requires a few tools. Once you have the drawer out, you can clean or sand the tracks before reinstalling it.