Have you ever gone to grab a utensil from your kitchen drawer only to have the contents spill out all over the place? It’s not only annoying, but it can be dangerous if you’re trying to grab a knife. One way to keep your kitchen drawers organized and tidy is by making drawer dividers.
You can easily make your own kitchen drawer dividers with just a few supplies.
- Decide which items you want to keep in your drawer and measure the space accordingly
- Find some dividers that fit snugly into the drawer or cut some out of cardboard
- Place the dividers into the drawer, making sure they are even and level
- Arrange your items in the different sections created by the dividers
DIY Kitchen Drawer Organizer: Two Methods!
What Can I Use to Make Drawer Dividers?
If you’re looking for a quick and easy way to create drawer dividers, you can use cardboard or foam core board. Cut the material to size and then use double-sided tape or glue to attach it to the inside of your drawer. For a more permanent solution, you can install wooden or plastic dividers that are specifically designed for drawers.
These can be found at most home improvement stores.
How Do You Make a Simple Drawer Divider?
Assuming you would like a tutorial on how to make a drawer divider:
What You Need:
-1/4 inch plywood (or any other thin wood material)
-Tape measure
-Pencil
-Ruler or a straight edge
-Circular saw or jigsaw (a handsaw will work too)
-High grit sandpaper
-Stain and sealer of your choice OR paint and primer
Instructions:
1. Start by measuring the inside width of your drawer. Ours was 12”, so we cut our 1/4” plywood to 12”x18”.
2. Then, use a pencil and ruler or a straight edge to draw two lines lengthwise down the center of your piece of wood, dividing it into thirds. Our lines were 4” apart.
3. Cut along these lines with either a circular saw or jigsaw – be extra careful if using a power tool!
We used a circular saw set at its deepest blade setting. If you don’t have access to either of these tools, you can also use a handsaw – it will just take longer.
4. Next, sand all the edges of your divider until they are smooth.
Wipe off any excess dust with a damp cloth before moving on to the next step.
5a). If you plan to stain and seal your drawer divider, do that now according to the instructions on your products label. Allow plenty of time for it to dry completely before proceeding to Step 6 .
5b).
How Do You Make a Cutlery Drawer Divider?
A cutlery drawer divider is a great way to keep your flatware organized and tidy. Here are some easy steps to make your own:
1. Measure the inside of your drawer and determine how many compartments you would like.
Cut pieces of cardboard or thin wood to create these divisions.
2. Place the dividers in the drawer and use double-sided tape or glue to secure them in place.
3. If desired, line the bottom of the drawer with felt or another soft material to protect your flatware from scratches.
How Thick Should Drawer Dividers Be?
There’s no definitive answer to this question – it depends on the size and type of drawer you’re using, as well as what you’re storing in the drawer. However, a good rule of thumb is to make sure your dividers are at least 1/2″ thick. This will ensure they’re sturdy enough to support whatever you’re putting in the drawer, and can be easily removed if necessary.
Credit: www.youtube.com
Kitchen Drawer Dividers Adjustable
If you’re like most people, your kitchen drawers are probably a mess. With all of the different items that find their way into them, it can be hard to keep them organized. But there is hope!
Kitchen drawer dividers adjustable are a great way to get your drawers under control.
These handy little devices allow you to customize the size of each compartment in your drawer, so you can make sure everything has its own place. No more hunting around for that elusive spatula!
And best of all, they’re relatively inexpensive, so you can easily outfit all of your drawers without breaking the bank.
There are a few things to keep in mind when shopping for drawer dividers. First, measure the inside dimensions of your drawer (without taking into account any raised edges) to ensure that you get a divider that will fit snugly.
Second, decide how many compartments you need – more is not always better; too many small compartments can actually make it harder to find what you’re looking for. Finally, think about what material you want your dividers to be made from. Wood or plastic are both popular choices and will work well in most kitchens.
Once you’ve got your new drawer dividers installed, take some time to group like items together so that everything has its own place. You’ll be amazed at how much easier it is to find what you need – and how much neater your kitchen looks!
Diy Drawer Dividers Wood
Organizing your drawers can be a real pain, but drawer dividers are a great way to keep everything in its place. You can buy pre-made dividers, or you can make your own! DIY drawer dividers are easy to make and customize to fit any space.
Wooden drawer dividers are a great option because they’re durable and look nice. Plus, you can easily cut them to size with a saw. To make your own wooden drawer dividers, start by measuring the inside of your drawers.
Then, cut pieces of wood to fit those dimensions. Make sure the pieces are about an inch shorter than the height of the drawer so they don’t get in the way when you open and close it.
Once you have your pieces cut, sand them down so they’re smooth.
Then, stain or paint them if desired. To install, just place the divider in the middle of the drawer and screw it into place using small screws or brad nails. That’s it!
Now all your stuff will stay neatly organized in its own little compartment.
Diy Drawer Dividers Cardboard
If you’re looking for a quick and easy way to organize your drawers, look no further than cardboard drawer dividers! Cardboard is an inexpensive material that can be easily cut to size and customized to fit any drawer. Plus, it’s strong enough to withstand the weight of your belongings without bending or collapsing.
To make your own cardboard drawer dividers, start by measuring the inside of your drawer. Cut two pieces of cardboard to fit the width of the drawer and glue them together at the seams. Then, measure and cut additional strips of cardboard to create compartments that are the desired size.
Glue these pieces in place or use tape to secure them temporarily until the glue dries.
Label each compartment with a piece of tape or label maker so you know what goes where, then fill ‘er up! You’ll be amazed at how much more organized your drawers will be with just a few simple DIY cardboard drawer dividers.
Conclusion
Making your own kitchen drawer dividers is a great way to organize your space and keep things organized. You can make them out of almost anything, but cardboard is the best material to use because it’s cheap and easy to work with.
To make kitchen drawer dividers, start by measuring the inside of your drawer and cutting out pieces of cardboard that will fit snugly.
Then, use a hot glue gun to attach the pieces of cardboard together. Once the glue has dried, you can add whatever dividers you want – just be sure to measure first so everything fits perfectly!