If your kitchen drawers are sticking or hard to open, it may be time to lubricate the drawer slides. This is a simple fix that anyone can do in just a few minutes. All you need is some WD-40 or other household lubricant and a rag.
First, open the drawer all the way and prop it up with something so that it stays open. Next, squirt some WD-40 onto the rag and wipe down the rails on both sides of the drawer. Be sure to get into all the nooks and crannies.
Once you’re done, close the drawer and test it out. It should slide smoothly now. If not, repeat the process until it does.
- Open the drawer and remove any items that are inside
- Locate the track on the side of the drawer and inspect it for dirt or debris
- If the track is dirty, clean it with a damp cloth or a vacuum cleaner attachment
- Apply a small amount of lubricant to a rag and wipe it along the length of the track
- Close the drawer and open it several times to spread the lubricant evenly
Lubricating Drawer Slides in Tool Box
How Can I Make My Kitchen Drawers Slide Easier?
If your kitchen drawers are sticking or hard to slide, there are a few things you can do to make them easier to use. First, check to see if the drawer is square in the opening. If it isn’t, you can try adjusting the hinges or brackets that hold the drawer in place.
Sometimes simply tightening these up can make a big difference.
If the drawer is still difficult to slide after checking and adjusting the hardware, you may need to sand down the edges of the drawer where it’s rubbing against the sides of the opening. You can also put lubricant such as WD-40 on these areas to help reduce friction.
Finally, if your drawers have been painted or varnished, this may be causing them to stick. In this case, you’ll need to strip off the old finish and start fresh with a new coat of paint or varnish. This will not only make your drawers slide more easily, but also give your kitchen an updated look!
Can You Use Wd40 on Drawer Slides?
Yes, you can use WD-40 to lubricate drawer slides. Just apply a small amount to the slide rails and drawers themselves, then operate the drawer back and forth a few times to distribute the lubricant. This will help reduce friction and make it easier for the drawer to open and close.
What is the Best Lubricant for Wooden Drawer Slides?
There are a few things to consider when choosing the best lubricant for wooden drawer slides. The first is what type of wood the slide is made from. If the slide is made from a softer wood, like pine, then a light lubricant like WD-40 will suffice.
However, if the slide is made from a harder wood, like oak, then a more heavy-duty lubricant, such as 3-in-1 oil, may be necessary.
The second thing to consider is how often the drawer will be used. If it’s a dresser drawer that gets opened and closed several times a day, then you’ll want to use a more durable lubricant so it doesn’t wear out quickly.
On the other hand, if the drawer is only used occasionally – such as a nightstand drawer – then you can get away with using a lighter lubricant since it won’t get much wear and tear.
Finally, you’ll also want to take into account any environmental factors that could affect the longevity of your chosen lubricant. For example, if you live in an area with high humidity levels, then an oil-based lubricant may not work as well since it can attract dust and dirt particles which can clog up the workings of the drawer over time.
In this case, you might prefer to use something like silicone spray which won’t gum up as easily in humid conditions.
In general, there are three main types of lubricants that are suitable for use on wooden drawer slides: oils (such as 3-in-1 oil or mineral oil), silicon sprays (such as WD-40), and beeswax pastes (which create a protective barrier against moisture). Which one you ultimately choose will depend on your specific needs and preferences.
What Kind of Oil Do You Use for Drawers?
There are a few different types of oil that can be used for drawers, depending on the material of the drawer and your personal preference. For example, mineral oil is a popular choice for wooden drawers because it penetrates deep into the wood and helps to protect it from moisture. Another option is beeswax, which also works well for wooden drawers and provides a nice natural shine.
If you have metal drawers, you can use WD-40 or another type of lubricant to help keep them sliding smoothly.

Credit: www.youtube.com
Wd40 on Drawer Slides
If your drawer slides are sticking, one thing you can try is WD-40. Just a light spray will do the trick. You may need to apply it a few times and work the drawer back and forth until it starts to move more easily.
If your slides are really gunked up, you may need to disassemble them and clean them with WD-40 before reassembling.
Best Lubricant for Ball Bearing Drawer Slides
If you have ball bearing drawer slides in your home, then you know how important it is to keep them lubricated. Without proper lubrication, these drawer slides can become dry and damaged, which can cause them to malfunction.
There are a variety of different lubricants on the market that can be used on ball bearing drawer slides.
However, not all of them are created equal. Some lubricants may work well for a short period of time but then wear out quickly, while others may never seem to work as well as they should.
To find the best lubricant for ball bearing drawer slides, it is important to consider a few factors.
First, you need to decide what type of lubricant you want to use. There are water-based and oil-based options available. Water-based lubricants tend to be less messy and easier to clean up if they spill, but they may not last as long as oil-based options.
Oil-based lubricants will last longer but can be more difficult to clean up if they spill.
Next, you need to consider how often you will be using the drawer slides. If you only use them occasionally, then you might not need a very heavy-duty lubricant.
However, if you use the drawer slides frequently or for heavy items such as tools or dishes, then you will want a stronger option that can withstand more wear and tear.
Finally, consider your budget when choosing a lubricant for ball bearing drawer slides. There are some very affordable options available that will get the job done without breaking the bank.
However, if you want a top-of-the-line product that will offer the best protection and longest lasting results, then you may need to spend slightly more money upfront.
How to Make Wooden Drawers Slide Smoothly
Making wooden drawers slide smoothly is a fairly simple process that just requires a little bit of elbow grease. Start by cleaning out the drawer, getting rid of any dirt, dust, or debris that may be causing friction. Next, apply a small amount of lubricant to the drawer runners.
You can use WD-40, furniture polish, or even cooking oil in a pinch. Once the lubricant has been applied, open and close the drawer several times to work it in. If your drawer is still sticking, you may need to sand down the runners slightly to create a smoother surface.
With a little bit of effort, you can get your wooden drawers sliding as good as new!
Conclusion
If you have difficulty opening and closing your kitchen drawers, it may be time to lubricate the drawer slides. This is a simple process that only takes a few minutes to complete. All you need is a can of WD-40 and a rag.
First, open the drawer and remove any items that are inside. Next, locate the slide rails on the side of the drawer. These are usually metal tracks that the drawer sits on.
Spray a liberal amount of WD-40 onto the rails and use the rag to wipe away any excess.
Once the rails are lubricated, close the drawer and test it out. You should notice an improvement in how smoothly it opens and closes.
If not, add more WD-40 until the problem is fixed.