In many homes, the kitchen is the hub of family activity and entertaining. Meals are prepared, stories shared and laughter enjoyed in this special room. If you find yourself bumping your head on low cabinets or straining to reach items stored on high shelves, it may be time to consider increasing the height of your kitchen platform.
Standard Height of working top in Kitchen | Kitchen Platform Height | Kitchen slab height
- Evaluate your kitchen’s current layout and decide where you would like the platform to be located
- Measure the distance from the floor to the underside of the countertop at this location
- Add two or three inches to this measurement to determine how high you will need to raise the platform
- Cut lumber pieces to size for each side of the platform using a saw
- Assemble the frame for the platform by nailing or screwing the lumber pieces together with wood screws or nails
- ) If you are raising the platform less than three inches, place concrete block underneath each corner of the frame and fill in around it with mortar mix until level with desired height; let dry overnight before proceeding to next step (skip ahead to Step 7)
- 6b
- ) If you are raising the platform more than three inches, construct a support system beneath it out of lumber pieces cut to size and nailed or screwed together; make sure supports are level before proceeding to next step
- ) Cover frame with plywood sheets, attaching them with wood screws driven through pre-drilled pilot holes; use as many sheets as necessary to cover entire frame surface area snugly without gaps between sheets; trim off any excess plywood around edges with a saw if necessary so that only smooth surfaces are exposed once finished (no raggedy/jagged edges)
How to Increase Kitchen Cabinet Height
Are you tired of those pesky lower kitchen cabinets that never seem to hold all of your pots, pans and other cooking supplies? If so, then it might be time to increase the height of your kitchen cabinets. With just a few simple tools and some careful planning, you can easily add an extra few inches to the height of your cabinets, giving you more storage space and making it easier to reach everything you need while cooking.
Here’s how to do it:
1. Measure the current height of your lower cabinets and make a note of it. You’ll need this measurement later on when purchasing new cabinet doors.
2. Decide how much taller you want your cabinets to be. A good rule of thumb is to add about 6-8 inches to the existing cabinet height.
3. Purchase new cabinet doors that are sized for the increased height of your cabinets.
Be sure to get doors that match the style of your existing cabinets so they look seamless once installed.
4. Remove the old doors from your lower cabinets and set them aside (you can donate them or sell them online). Then, using a drill or screwdriver, remove any hinges or hardware from the inside of the cabinet frame.
5a. If you’re adding only a few inches onto the height of your lower cabinets, then you can simply attach new hinges onto the inside frame and rehang the doors using screws (drill pilot holes first). Make sure everything is level before tightening any screws all the way down.
How to Raise Base Cabinet Height
If you’re planning a kitchen remodel, one of the biggest decisions you’ll make is what height to raise your base cabinets. The standard cabinet height is 30 inches, but many homeowners choose to raise them to 36 inches or 42 inches. This decision will affect everything from countertop selection to appliance installation, so it’s important to weigh all your options before making a final decision.
Here are a few things to consider when deciding how high to raise your base cabinets:
1. Countertop Height: The most important factor in determining cabinet height is the height of your countertops. If you’re planning on using standard 24-inch-tall countertops, then raising your cabinets to 36 inches or 42 inches will put the counters at a comfortable working height for most people.
If you want taller countertops (like 38-inch-tall ones), then you’ll need to raise your cabinets accordingly.
2. Appliance Installation: Another thing to consider is whether or not you’ll be installing any new appliances during your remodel. If so, make sure that the appliances will fit underneath the raised cabinets – many dishwashers and ovens have a minimum clearance requirement of 18 inches or more.
Additionally, keep in mind that raising your cabinets may require moving electrical outlets and gas lines; consult with a professional before making any final decisions.
3. Cabinet Selection: Once you’ve decided on the perfect cabinet height for your kitchen, it’s time to start shopping! There are dozens of different styles and finishes available, so take some time browsing until you find something that fits both your aesthetic and functional needs.
And don’t forget about storage solutions – adding pull-out drawers or extra shelves can help make even the tallest cabinet more user-friendly.
How to Raise Kitchen Sink Height
If you’re looking to raise the height of your kitchen sink, there are a few things you’ll need to do. First, you’ll need to remove the old sink and detach the plumbing. Next, measure the new sink and mark where you’ll need to make holes for the faucet and drain.
Once that’s done, install the new sink according to the manufacturer’s instructions. Finally, reattach the plumbing and test everything out before use.
Kitchen Floor Height Increase
If you’re considering a kitchen floor height increase, there are a few things you should know. First, the average kitchen floor is about 30 inches off the ground. That means if you’re going to add two inches of height, your new floor will be about 32 inches off the ground.
Second, you’ll need to factor in the thickness of your new flooring material when deciding on the final height of your new floor. For example, if you’re adding tile to your kitchen floor, the tile itself will add some additional height to the overall space.
When increasing the height of your kitchen floors, it’s important to work with a professional contractor who can help ensure that the job is done correctly and safely.
They’ll also be able to advise you on what type of materials would work best for your specific project and budget. If you’re ready to take on this home improvement project yourself, just be sure to do your research and plan ahead so that everything comes out just the way you want it too!
Kitchen Counter Too Low
Many people think that the kitchen counter should be lower so they can easily reach things while cooking. However, this is not always the case. The kitchen counter should actually be at a comfortable height for you to work at without having to stoop down or stretch too high.
If your kitchen counter is too low, it can cause back pain and fatigue.
Credit: czhonland.en.made-in-china.com
How Do I Raise the Base of My Kitchen Cabinets?
If your kitchen cabinets are in dire need of a facelift, but you’re not ready to replace them entirely, consider raising the base. This is a simple and relatively inexpensive way to give your kitchen an updated look. Here’s how to do it:
1. Remove the doors from your cabinets and all hardware (knobs, hinges, etc.). Set these aside somewhere safe.
2. Using a measuring tape, measure the height of your current cabinet bases.
You’ll want to add 1-2 inches to this measurement when cutting your new base boards.
3. Cut your new baseboards to size and attach them to the cabinet frame with finishing nails and wood glue. Be sure to use a level when attaching the new baseboards so they’re even with one another.
4. Reattach the doors and hardware once the glue has dried completely (24 hours). Add any additional trim or molding if desired.
What is the Standard Height of Kitchen Platform?
There is no definitive answer to this question as kitchen platforms can vary in height depending on a number of factors such as the height of the person using them, the type of activities being undertaken and the overall design of the kitchen. However, a rough guide would be that most kitchen platforms are between 700mm-900mm in height.
How Much Does It Cost to Raise a Countertop?
It costs an average of $2,000 to raise a countertop. The cost will vary depending on the size and weight of the countertop, as well as the height you want it raised to. You will also need to factor in the cost of hiring someone to do the work for you, as well as the cost of any materials needed.
How Can I Raise My Benchtop?
If you’re looking to raise your benchtop, there are a few things you can do. First, make sure that your bench is level. You can do this by using a spirit level or a ruler.
Once your bench is level, you can then start raising it by adding blocks underneath the legs. If you’re not sure how high to raise it, start with a couple of inches and then go from there. You can also add weight to the top of the bench to help keep it in place.
Conclusion
If you’re finding that your kitchen platform is a little too low, there are a few things you can do to increase the height. One option is to add some risers to the legs of the platform. You can also add a new layer of plywood on top of the existing one.
If you want to get really creative, you could even build a new platform entirely! Whichever route you choose, make sure that you take measurements and test it out before committing to anything. With a little bit of effort, you’ll be able to cook in comfort in no time!